GUIDE

Breaker or Safety Switch Keeps Tripping?

A breaker or safety switch that trips is doing its job: protecting you from an electrical fault. If it keeps happening, here's what it usually means and when to call an electrician.

Breaker or safety switch?

  • Circuit breaker: trips when a circuit is overloaded or there is a short circuit.
  • Safety switch (RCD): trips when it detects electricity leaking to earth, which could mean a shock risk. It usually has a "test" button.

Common causes

  • A faulty appliance: the most common cause of a tripping safety switch.
  • Too much on one circuit: heaters, kettles and other high-load appliances running at once.
  • Moisture: water in outdoor power points, light fittings or appliances, often after rain.
  • A wiring fault: damaged or deteriorating wiring, loose connections, or a failing breaker.

What's safe to check

  • Unplug everything on the circuit that tripped.
  • Try to reset the breaker or safety switch once.
  • If it stays on, plug appliances back in one at a time. If it trips when a particular appliance is plugged in, stop using that appliance.

Don't keep resetting it, and don't open the switchboard. If it trips again straight away, trips with nothing plugged in, or you notice heat, burning smells or scorch marks, call an electrician.

In a workplace?

Faulty plug-in equipment is a common cause, which is one reason regular test and tag matters. If equipment passes testing and the safety switch still trips, the fault may be in the wiring. See electrical fault finding.

COMMON QUESTIONS

Why does my breaker keep tripping with nothing plugged in?

If it trips with everything unplugged, the fault is probably in the wiring, a fixed appliance, or the breaker itself. Call an electrician.

Why does my safety switch trip when it rains?

Moisture is getting into something on the circuit, often an outdoor power point, light or garden fitting. An electrician can find and fix it.

Is it dangerous if my breaker keeps tripping?

The breaker is protecting you, but repeated tripping means there is a fault that needs fixing. Don't keep resetting it. Call an electrician.

NEED A REGISTERED AUCKLAND ELECTRICIAN?

Commercial, industrial and residential electrical work across Auckland, with Certificates of Compliance (CoC) provided. Tell us what you need and we'll give you a clear quote before any work starts.

FREE QUOTE

GET A FREE QUOTE

Tell us what you need and we'll get back to you with a clear, no-obligation quote. Or email info@westelectrics.nz.

Clear, no-obligation quote. Prefer email? Write to info@westelectrics.nz.

FREE QUOTE