- AS/NZS 3760
- The joint Australian and New Zealand standard for the in-service safety inspection and testing of electrical equipment. It sets out how equipment is inspected and tested, how often, who can do it and what records to keep. The current edition is AS/NZS 3760:2022. AS/NZS 3760 compliance guide →
- AS/NZS 3012
- The standard for electrical installations on construction and demolition sites. It sets the 3-monthly testing interval for construction site equipment and covers site supply, RCDs and leads. AS/NZS 3012 explained →
- Appliance
- Any electrical item that plugs into a power point with a flexible cord, such as a kettle, computer, heater or power tool.
- Class I appliance
- An appliance that relies on an earth connection for safety. It has a metal body or parts connected to the earth pin of the plug. Class I items get an earth continuity test as well as an insulation test. Class I vs Class II →
- Class II appliance
- A double-insulated appliance that doesn't rely on an earth connection. It's usually marked with a square inside a square. Most phone chargers, hair dryers and many power tools are Class II. Class I vs Class II →
- Competent person
- A qualified person with the training, knowledge and experience to inspect and test equipment to AS/NZS 3760. In New Zealand they don't need to be an electrician, but repairs to faulty equipment are a different matter.
- Cord extension set
- The standard's term for an extension lead: a flexible cord with a plug on one end and a socket on the other. Extension leads are tested and tagged like any other item.
- Earth continuity test
- An electrical test on Class I equipment that checks the earth path from the plug's earth pin to the metal parts of the appliance is intact. A broken earth can leave metal parts live if a fault occurs.
- Electricity (Safety) Regulations 2010
- New Zealand regulations that require electrical equipment to be safe. They treat an appliance used by an employee or contractor of its owner as electrically safe if it has a current tag issued under AS/NZS 3760.
- Equipment register
- A record of every item tested: what it is, where it's kept, its test date and result, who tested it and when the next test is due. Auditors and insurers often ask to see it. Free register template →
- Fail tag / out of service tag
- A tag, usually red and white and marked Danger or Out of Service, that marks equipment as unsafe and not to be used. Failed equipment is removed from service until it's repaired and retested, or disposed of.
- Hard-wired equipment
- Equipment connected directly to the building's fixed wiring with no plug, such as a built-in oven or hot water cylinder. It's part of the fixed installation, not test and tag, and is looked after by a licensed electrician.
- HSWA
- The Health and Safety at Work Act 2015. It requires a business to ensure, so far as is reasonably practicable, the health and safety of workers and others, including providing and maintaining safe equipment. Is test and tag mandatory in NZ? →
- Insulation resistance test
- An electrical test that checks the insulation between live parts and the outside of the appliance is still doing its job. Damaged or deteriorating insulation can let current leak to parts people touch.
- Leakage current test
- A test, done with the appliance running, that measures how much current is escaping where it shouldn't. It's an alternative or addition to insulation resistance testing for some equipment.
- New to service
- A tag or record showing equipment was brand new when it was put into use. New equipment is visually checked and tagged, and its first test is due at the normal interval for its environment.
- PAT testing
- Portable appliance testing: the UK and Ireland name for test and tag. The process is similar, but the standards and rules are different. PAT testing vs test and tag →
- PCBU
- Person Conducting a Business or Undertaking. The legal term under HSWA for the business, organisation or person with health and safety duties, usually the employer. Who is responsible? →
- Polarity test
- A check, mainly on extension leads and power boards, that active and neutral are wired to the right terminals. Reversed wiring can leave parts live when switched off.
- Portable outlet device
- The standard's term for a power board or multi-plug adaptor. These are tested and tagged like any other item.
- Power board
- A portable strip of several sockets on a lead. Overloading and daisy-chaining power boards is a common cause of overheating.
- RCD
- Residual current device, also called a safety switch. It cuts power fast if it detects current leaking to earth, for example through a person. RCDs are tested by pushing the test button and by timing how quickly they trip. RCD testing →
- Retest date
- The date the next test is due, written on the tag and in the register. It's set by the interval for the environment the equipment is used in. Frequency checker →
- Risk assessment
- A documented look at the hazards in your workplace. AS/NZS 3760's intervals are a guide, and a risk assessment can support testing more or less often.
- Tag
- A durable label attached to the cord near the plug, showing the tester, test date, retest date and result. On construction sites tags are often colour-coded by quarter. Test and tag colours →
- Testing interval
- How often equipment should be tested. Under AS/NZS 3760 it ranges from 3 months on construction sites to up to 5 years for equipment that stays put and isn't exposed to damage. Frequency checker →
- Visual inspection
- The first step of every test and tag: a careful look at the plug, cord, casing and switches for damage. Many faults are found this way. Visual inspection checklist →
- WorkSafe
- WorkSafe New Zealand, the main health and safety regulator. WorkSafe says test and tag isn't mandatory, but equipment must be electrically safe and maintained in a safe condition.
No matching terms. Try the FAQ or ask us.
More Tools & Guides
tool
Testing Frequency Checker
Find out how often your equipment needs testing and when your next test is due.
toolTest & Tag Colours
See the current tag colour and what each colour and tag type means.
toolEquipment Register Template
Free printable and downloadable test and tag register for your records.
guideAS/NZS 3012 Explained
The construction site electrical standard in plain English.
guideRCD Testing
Safety switch testing for Auckland workplaces.
guidePricing Guide
What affects the cost of test and tag in Auckland.
GET YOUR WORKPLACE TESTED
AS/NZS 3760 test and tag for Auckland businesses, with a full digital report for your records. Get a free, no-obligation quote today.
FREE QUOTE
GET A FREE QUOTE
Tell us what you need and we'll get back to you with a clear, no-obligation quote. Or email info@westelectrics.nz.