FREE TOOL

VISUAL INSPECTION CHECKLIST

Most electrical faults can be spotted before anyone gets hurt. Use this checklist for a quick pre-use check of any plug-in equipment, or print it for your staff room, workshop or ute.

Progress

If something fails

  1. Stop using it and unplug it at the power point.
  2. Label it "Do not use" so nobody else picks it up.
  3. Remove it from service and tell whoever looks after equipment.
  4. Repair or replace it. Repairs should be done by a qualified person, and the item must be retested before it's used again.

Why a visual check matters

Under AS/NZS 3760, every test and tag starts with a visual inspection, and damaged cords and plugs are among the most common reasons equipment fails. A quick check by the person using the equipment catches damage that happens between tests, which is why it's worth building into your routine.

A visual check doesn't replace test and tag. Some faults, like a broken earth connection or failing insulation, can only be found with electrical testing by a competent person.

COMMON QUESTIONS

Is a visual inspection the same as test and tag?

No. A visual inspection is the first part of test and tag, and it catches many faults. Test and tag adds electrical tests, such as earth continuity and insulation resistance, which find faults you can't see. Staff checks between tests are a good habit but don't replace testing by a competent person.

How often should staff check their equipment?

A quick look before each use is a good habit, especially for power tools, extension leads and anything that is moved around. Hire equipment should be inspected before every hire.

What should I do if equipment fails a visual check?

Stop using it, unplug it, label it 'Do not use' and remove it from service. Report it to whoever looks after equipment. It should be repaired by a qualified person and retested, or disposed of.

TIME FOR A PROPER TEST?

We visually inspect, electrically test and tag every item on site across Auckland, and give you a full register.

FREE QUOTE

GET A FREE QUOTE

Tell us what you need and we'll get back to you with a clear, no-obligation quote. Or email info@westelectrics.nz.

Clear, no-obligation quote. Prefer email? Write to info@westelectrics.nz.

FREE QUOTE