GUIDE

Class I vs Class II Appliances

Electrical appliances are built to protect you from electric shock in different ways. Knowing the difference explains why they're tested differently.

Class I: earthed appliances

Class I appliances have basic insulation around their live parts, and their metal casing is connected to earth through the earth pin on the plug. If a live wire comes loose and touches the casing, the fault current flows to earth and trips the circuit protection, instead of flowing through whoever touches the appliance.

That protection only works if the earth connection is intact. A broken earth wire gives no warning, and the appliance keeps working normally, which is why Class I appliances get an earth continuity test.

Class II: double-insulated appliances

Class II appliances have two layers of insulation, or one reinforced layer, so live parts can't come into contact with any surface you can touch. They don't rely on an earth connection, and many have plugs without an earth pin.

You can recognise them by the double insulation symbol: a small square inside a larger square on the rating plate.

Side by side

Class I Class II
Protection Basic insulation plus an earth connection Double or reinforced insulation, no earth needed
Typical casing Often metal Usually plastic
Plug Has an earth pin May have only two pins
Symbol No special symbol (may show earth symbol) Square inside a square
Examples Kettles, toasters, fridges, microwaves, desktop PCs Many power tools, hair dryers, phone chargers, lamps
Tests Visual, earth continuity, insulation or leakage Visual, insulation or leakage

What about Class III?

Class III equipment runs on safety extra-low voltage, such as battery-powered tools and devices. The equipment itself generally isn't part of test and tag, but the mains-powered charger or power supply is, and needs testing like any other appliance.

How each class is tested

  • Both: a thorough visual inspection of the casing, cord and plug, then an insulation resistance or leakage current test.
  • Class I only: an earth continuity test to confirm the earth connection is sound.

Don't assume: a plastic case doesn't always mean Class II, and a two-pin plug doesn't always mean double insulated. Check the rating plate for the symbol.

COMMON QUESTIONS

What is the difference between Class I and Class II appliances?

Class I appliances rely on basic insulation plus an earth connection for protection, and usually have a metal casing and an earth pin on the plug. Class II appliances are double insulated, don't rely on an earth connection, and are marked with a square-inside-a-square symbol.

Do Class II appliances need test and tag?

Yes. Class II appliances still need visual inspection and electrical testing. They don't get an earth continuity test, but their insulation is tested.

How do I know if an appliance is Class II?

Look for the double insulation symbol, a small square inside a larger square, on the appliance's rating plate or label.

GET YOUR WORKPLACE TESTED

AS/NZS 3760 test and tag for Auckland businesses, with a full digital report for your records. Get a free, no-obligation quote today.

FREE QUOTE

GET A FREE QUOTE

Tell us what you need and we'll get back to you with a clear, no-obligation quote. Or email info@westelectrics.nz.

Clear, no-obligation quote. Prefer email? Write to info@westelectrics.nz.

FREE QUOTE