SERVICE

RCD Testing Auckland

RCDs (safety switches) are your last line of defence against electric shock. We test that they trip fast enough to protect your people, and record the results for your compliance records.

What we test

  • Switchboard RCDs: fixed safety switches protecting your circuits.
  • Portable RCDs: plug-in RCDs and RCD-protected power boards, common on construction sites and in workshops.

How RCD testing works

Push-button test

Pressing the RCD's test button checks the mechanism trips. It's quick, and something your team can do between professional tests, but it doesn't tell you how fast the RCD responds.

Trip-time test

Using a calibrated RCD tester, we simulate a fault and measure how long the RCD takes to cut the power. If it's too slow, or doesn't trip at all, it fails and needs replacing by an electrician.

Why it matters: an RCD can look and feel normal and still be too slow to prevent a serious shock. The only way to know is to test it.

Pricing

RCD testing costs $3.50 per RCD plus GST, the same as an appliance, and RCDs count towards the 10 items included in the $60 call-out. Add it to your test and tag visit, and see our full pricing guide.

How often should RCDs be tested?

AS/NZS 3760 sets intervals for both push-button and trip-time tests, which depend on the environment and whether the RCD is fixed or portable. Higher-risk environments, like construction sites and workshops, need more frequent testing. We'll recommend the right schedule for your site.

Areas we cover

We provide RCD testing across Auckland, including Auckland CBD, East Tamaki, Penrose, Albany and Manukau.

COMMON QUESTIONS

What is an RCD?

An RCD (Residual Current Device), often called a safety switch, cuts power in a fraction of a second when it detects electricity leaking to earth, for example through a person. It is one of the most important protections against fatal electric shock.

How much does RCD testing cost in Auckland?

RCD testing costs $3.50 per RCD plus GST, the same as an appliance, and is done in the same visit as your test and tag.

What is the difference between pushing the test button and an RCD trip-time test?

Pressing the test button only checks that the RCD's mechanism trips. A trip-time test uses specialist equipment to check the RCD disconnects power fast enough to protect someone from a fatal shock. Both are recommended under AS/NZS 3760.

BOOK RCD TESTING

Add RCD testing to your test and tag visit and cover both in one trip. Get a free quote for your Auckland workplace.

FREE QUOTE

GET A FREE QUOTE

Tell us what you need and we'll get back to you with a clear, no-obligation quote. Or email info@westelectrics.nz.

Clear, no-obligation quote. Prefer email? Write to info@westelectrics.nz.

FREE QUOTE