GUIDE

Who Is Responsible for Test & Tag?

Employer, landlord, tenant, contractor? Responsibility for electrical equipment usually follows who owns and supplies it. Here's how it works in New Zealand.

The short answer

In New Zealand, the business that provides the equipment is responsible for keeping it safe. Under the Health and Safety at Work Act 2015, a business (a "PCBU") has a primary duty of care that includes providing and maintaining safe plant, and electrical equipment counts.

WorkSafe's position is clear: test and tag is not mandatory, but equipment must be electrically safe and maintained in a safe condition, and it's up to the business to decide how to achieve that. Testing to AS/NZS 3760 is a recognised way to show it. See is test and tag mandatory in NZ?

Employers and businesses

If your business provides equipment for workers to use, it's your responsibility. That includes:

  • Tools, appliances, IT equipment, leads and power boards you supply.
  • Equipment staff bring from home and use at work, like heaters and chargers. It's best to include these or set a clear policy.
  • Equipment used by volunteers and contractors working for you.

The Electricity (Safety) Regulations also treat an appliance used by an employee or contractor of its owner as electrically safe if it has a current tag issued under AS/NZS 3760. That's one reason test and tag is the usual way businesses meet their duty.

Landlords and tenants

Commercial premises

  • Tenants are generally responsible for the equipment they own and bring in.
  • Landlords are generally responsible for appliances they supply, like kitchen appliances in a shared staff room or heaters in a serviced office.
  • Check your lease. Many commercial leases say who's responsible for testing, and some landlords ask tenants for test records.

Residential rentals

Residential landlords must keep the property in a reasonable state of repair, including keeping the electrical wiring safe and in working order. There's no specific rule requiring landlords to test and tag appliances they provide, but testing them between tenancies is a simple way to show they're safe.

Contractors and subcontractors

Contractors are responsible for the tools and equipment they bring onto a site. When more than one business works at the same place, each has health and safety duties, and WorkSafe says they must consult, cooperate and coordinate with each other. You can't contract out of your duties.

In practice:

  • Main contractors usually require current tags on every tool and lead before it's used on site.
  • Construction sites test every 3 months under AS/NZS 3012. See AS/NZS 3012 for construction sites.
  • Keep a copy of your test records in the ute, many sites ask to see them at induction.

Hire companies

Hire companies supply equipment to other businesses and the public, so they're responsible for it being safe when it goes out. Hire equipment is usually inspected before every hire and tested every 3 months.

Schools

The Ministry of Education says schools have a legal duty to make sure electrical appliances and equipment are electrically safe and maintained in good condition, and boards need up-to-date policies and practices.

Who can do the testing?

The person testing doesn't need to be an electrician, but they do need to be qualified: trained, competent and familiar with the standards involved. Repairing faulty equipment is different: WorkSafe notes that only a registered electrical worker can fix problems that testing reveals.

Quick reference

Equipment Usually responsible
Equipment a business supplies to its workersThe business
Tenant-owned equipment in leased premisesThe tenant
Appliances supplied by a landlordThe landlord (check the lease)
Contractor's tools on a siteThe contractor, coordinating with the main contractor
Hire equipmentThe hire company

This guide is general information, not legal advice. For the official position, see WorkSafe's testing and tagging electrical appliances page and its guidance on overlapping duties.

COMMON QUESTIONS

Who is responsible for test and tag in a NZ workplace?

The business (the PCBU, or person conducting a business or undertaking) is responsible for making sure the electrical equipment it provides is safe. WorkSafe says it's up to the PCBU to decide whether to test and tag, but equipment must be electrically safe and maintained in a safe condition.

Does the landlord or the tenant pay for test and tag?

Generally, whoever owns and supplies the equipment is responsible for it. Tenants look after their own equipment; landlords look after appliances they provide. Commercial leases often spell this out, so check yours.

Do contractors need to test and tag their own tools?

Contractors are responsible for the equipment they bring onto a site. Main contractors often require current tags before tools are used on site, and both businesses must consult, cooperate and coordinate on health and safety.

Does the person doing test and tag need to be an electrician?

No, it doesn't need an electrician, but it does need a qualified person. WorkSafe says the tester must understand the standards involved and be competent to do the testing. Repairs to faulty equipment are a different matter, and need an electrician.

SORT YOUR SIDE OF IT

Whatever equipment you're responsible for, we'll test it, tag it and give you the records to prove it. Mobile across Auckland.

FREE QUOTE

GET A FREE QUOTE

Tell us what you need and we'll get back to you with a clear, no-obligation quote. Or email info@westelectrics.nz.

Clear, no-obligation quote. Prefer email? Write to info@westelectrics.nz.

FREE QUOTE